Adjust-A-Gate steel gate kits include everything
necessary (except wood) to install the gate,
i.e. frame, sleeves, truss cable and turnbuckle,
J-lag screw or J-Bolt hinges (depends on model -
see below), (1) gravity latch or (1) two-sided
latch per frame (depends on model - see below.)
||Gate Kit Frame Size
||2-Rail, 47-1/4" High x 36''
- 60'' Wide
||2-Rail, 47-1/4'' High x
Steel Adjust-A-Gate Kits are ideal for 4' and 5'
high wood gates, allowing pickets to rest near
flush top and bottom rails, or with a slight
overlap. Steel gate frame is approx. 4' high.
'Round up' if your gate width is close to width
shown. Gates feature 1-1/2'' steel galvanized
and painted gate frames.
Give your fence the portal it deserves.
Tired of wrestling with that saggy old gate? Not
sure how to build a new gate that will fit right
and stay solid in future? The answer may be
Adjust-A-Gate, an innovative gate-building kit
that's perfect for the professional or the
The Adjust-A-Gate kit is one of those "why
didn't I think of that" products. It's simply a
metal framework that is combined with standard
2x4 lumber to create a custom-fit gate for
fences that are four, five, or six feet high.
There are two widths available, one for 36-inch
to 60-inch wide openings and another for 60-inch
to 96-inch wide openings. A pair can be used
together to accommodate openings from 10 to 16
feet. Kits available for 2-rail or 3-rail gates.